X200

  • PREAMPLIFIER
      Name   Value
      Input impedance - Phono   47 kOhm || 120 pF
      Input impedance - Line   25 kOhm || 10 pF
      Max. input signal - Phono   40 mV (f = 1 kHz)
      Max. input signal - Line   8 V
      Gain - Phono   +46 dB (f = 1 kHz)
      Gain - Line   0 dB
      Max. deviation from RIAA curve - Phono   +/- 0.5 dB
      Frequency response - Line   4 Hz to 1 MHz (-3 dB)
      Total Harmonic Distortion - Phono   < 0.03% (f = 10 kHz)
      Total Harmonic Distortion - Line   < 0.001% (f = 20 Hz to 20 kHz)
      Total Harmonic Distortion - EQ   < 0.002% (f = 20 Hz to 20 kHz)
      Signal-to-noise ratio - Phono   > 60 dB (1 V, without A-filter)
      Signal-to-noise ratio - Line   > 90 dB (1 V, without A-filter)
      Signal-to-noise ratio - EQ   > 90 dB (1 V, without A-filter)
      Bass boost in setting I - EQ   + 5.6 dB
      Bass boost in setting II - EQ   + 7.6 dB
      Treble boost in setting I - EQ   + 6 dB
      Treble boost in setting II - EQ   + 8 dB
  • PHONES
      Name   Value
      Rated output power   2 x 0.3 W (RL = 32 Ohm)
      Gain   -6 dB (RL = 32 Ohm)
      Frequency response   4 Hz to 1 MHz (-3 dB)
      Total Harmonic Distortion   < 0.008% (RL = 32 Ohm, 0.125 W)
      Signal-to-noise ratio   > 95 dB (RL = 32 Ohm, rated output))
  • POWER AMPLIFIER
      Name   Value
      Rated output power   2 x 100 W
      Input impedance, Direct balanced IN   20 kOhm
      Input impedance, Direct unbalanced IN   10 kOhm
      Input sensitivity, Direct balanced IN   460 mV, to rated output
      Input sensitivity, Preamp IN   460 mV, to rated output
      Input sensitivity, Phono IN   2.25 mV, to rated output
      Gain   +35.5 dB (RL = 8 Ohm)
      Frequency response   27 Hz to 70 kHz (-3 dB, rated output)
      Total Harmonic Distortion   < 0.5% (f = 1 kHz, rated output)
      Signal-to-noise ratio   > 100 dB (RL = 8 Ohm, rated output)
      Load impedance   4 to 8 Ohm
  • GENERAL
      Name   Value
      Number of input ports / channel   1 unbalanced Phono IN
        4 unbalanced Line IN
        1 unbalanced Direct IN
        1 balanced Direct IN
      Number of output ports / channel   1 unbalanced Line OUT
        1 unbalanced Sub OUT
        1 unbalanced EQ OUT
        1 unbalanced Phones OUT
        1 balanced Power OUT
      Tubes required   4 x KT120 (KT150 or KT170 optionally)
        2 x 6922
        2 x 12AX7
      Weight   23 kg
      Dimensions   43 x 47.5 x 20 cm
      Power requirement   Idle: 200 W, Maximum: 720 W

CONTACT US

Should you have any question about our products or need any further information, please do not hesitate to contact us at one of the following contacts:  


Hungary, 4400, Nyíregyháza, Derkovits street 132.​ 
Opening hours:
M-F 8:00-15:30
Call center opening hours: M-F 8:00-12:00
Phone: +36 42 446-688 
Fax: +36 42 446-688